Description
Skin safe liquid silicone rubber for mask making
Mask Making & Make Up FX Silicone
1. Description
RT-8 series silicone is great to make silicone mask products in Hollywood favorites and film industry. Which is a medical silicone for mask making or skin. It’s non-toxic, without any side effects to human body, you can ware it safely. And breath freely by your nostrils and you can open or close your mouth anytime.
2.Features:
very soft,very strong,very stretchy,Low viscosity,Odorless, Long casting,Skin safe & medical grade,Easy processing - mixing ratio 1 : 1,Adjustable working time and curing time
GuoChuang Silicone, the lost wax casting silicone manufacturer in China, sale and export quality silicone rubber, casting silicone rubber to the world.
3.Processing
1. Mixing the two components The components A and B are mixed by weight in the above indicated ratio. The mixing can be carried out either by hand or using a low-speed electric or pneumatic mixer to minimise the introduction of air and to avoid any temperature increase. It is also possible to use a special mixing and dispensing machine for the two silicone components. Further information is available upon request.
2. Degassing The mixture should be degassed preferably at 30 to 50 mbar to eliminate any entrapped air. If a dispensing machine is used, the two components are degassed separately prior to mixing. The silicone mixture expands to 3 to 4 times of its initial volume and bubbles rise to the surface. The bubbles progressively disappear and the mixture returns to its initial volume after 5 to 10 minutes. Wait a few minutes to complete the degassing and then flash the vacuum. The silicone is ready for pouring, either by gravity or under low pressure. Note: Flashing the vacuum once or twice accelerates the degassing. It is recommended to use a container with a high diameter / height ratio.
3. Polymerisation The system polymerises at 23°C. The curing may be slowed down at lower temperature and contrary accelerat